To change the rotor you will need to remove the caliper bracket. The caliper bracket is held to the front housing assembly by two more bolts. Remove those two bolts and then pull off the caliper bracket. The rotor should now just fall off. You may need to smack it a few times with a hammer to get it to come loose. The rotor and brake pads are now removed. Now you need to start replacing parts. The first part to put back on is the rotor. If the old rotor was difficult to remove, place some Permatex Anti-sieze compound on the back of the new rotor before placing it back on the hub assembly. This will ensure that you don't have a problem getting the rotor off the next time you do a brake job.

pick and pull yards I do not know how those wipers ever got replaced. But I think about it every time I replace my own. pick n pull part pricing remember once replacing them while a co-worker friend looked on and it went quickly, and he said I could work at a service station, in a tone that revealed admiration. This was a guy who would have fit it at that auto parts store, he could speak that dialect, saved only for men who can work on cars. I felt my Dad would have been proud at that moment, restoring our collective manhood.

You will have to have a clear title in your name to sell your car for parts. The junk yard does not want the hassle of dealing with a stolen car that has owners searching for it. Of course, you know the car belongs to you, but the junk yard owner does not and does not want to take the risk. If you cannot find the title, order a copy before you try to sell the car.

pick a part The next thing that you will really need to do is to get all of your auto parts ready and have them in front of you. This means having your replacement door too. You can go to many places to find these auto parts but the cheapest is going to be the good old junk yard. They can help you to find what ever door you may need if they have one in their yard. You just have to ask them. You can also try your local auto parts dealer, because they can have products shipped to you. This can also be a great way to get the door that you may need for your work.

pull a part There is no doubt that the internet has made it much easier to shop for auto parts, and you can find just about every Mustang part you are looking for online. Not only standard parts, but you can also locate add-ons to allow you customize your Mustang and make it personal to you. headlights, floor mats, fenders, transmissions, clutches, and even brake cables: you name it, you can get it online. However, you have to make sure that the site you are visiting is reputable, and are not selling cleaned-up used parts as new. It isn't common, but it does happen.

Changing disc brakes is one of those jobs. Not all vehicles are the same, so before you start removing parts from your car, make sure you inspect the entire area to be worked on for any issues that you might run into. Unfortunately you cannot always make a determination of problems until you have started removing the old parts. I also recommend starting the job when you have a couple days off from work. Then if you do run into a snag you will have time to get the necessary parts or help before you have to return to work. I have changed the brake pads on all my vehicles since I owned my first car nearly 35 years ago. Disc brakes have always been extremely easy to change. Drum brakes are more difficult and will not be discussed in this article.